FAQ Firmware x108g (1 Viewer)

[sq8aqx]

I have x108G, serial number X11499.
What version of the software can I upload?

 

[X-108]

FIRMWARE X108G Outdoor Version - for older and newer x108G outdoor

• About latest version of firmware for X108G, please see below information:
• If your X108G is indoor version, please use the latest version: X108G_FW_V1.00_build004
• If your X108G is outdoor version, please note:
• If the first number of your X108G’s serial number is 0, please use the latest version: X108G_OLED_FW_V1.00_build029
• If the first number of your X108G’s serial number is 1 (except 10350~10412), please use the latest version: X108G_OLED_FW_V2.00.0_build010
• If your serial number is between #10350~10412, please use this latest version: X108G_OLED_FW_V2.00.0_build010(VCMP)

///Please note:

1. Make a backup of your advanced settings (press and hold F1 button while powering on). notice the settings on paper or take a pic.
2. do the update:
   • Firmware update tutorial:
     1. Press the frequency knob (keep the action), turn on, connect the
        USB cable to the computer.
     2. Open “ My computer”, there is a Update X108 (mobile
        storage device.
     3. Open Update X108 (*), delete the file, this time on the radio will show delete progress (waiting for progress to complete 100%).
     4. Copy the latest firmware to the Update X108 (to wait for
        replication to complete, and then disconnect the USB and the
        computer.
     5. Restart X108G, firmware update is completed!
3. thats it

Unless you have made backup of your extended settings - check this tutorial and file to bring your filter settings back

 

[sq8aqx]

I will upload X108G_OLED_FW_V2.00.0_build010.
I will write about the tests

 

[sq8aqx]

I have loaded different versions of the software.
It seems that the DDS synthesizer is not working.
DDSCLK:026000000Hz
DCLKx6:0

 

[sq8aqx]

DCLKx6:0 and DCLKx6:1 - DDS no working.

 

[sq8aqx]

https://x-108.com/resources/firmware-update-x108_fw_v1-35-1_build0150.43/
can someone send me a test?

 

[ve7tmz]

I will upload X108G_OLED_FW_V2.00.0_build010.
I will write about the tests

Did you have any luck upgrading? Anything I should watch out for?

 

[cat63]

Hello!
I have a bricked CS108G+ with black display. Only active screen is for firmware update sequence. Any chance to find a firmware version for CS108G+ ?

 

[sq8aqx]

I have an x108G, serial number X11499.
I couldn't find the software.
The radio turns on, but the receiver and transmitter do not work.
DDS doesn't work.